Manlift Platforms and Forklift Trucks

Primarily, forklift trucks are intended for lifting materials and not people. People should never be lifted on the forks or on a pallet, or something similar, balanced on the forks because they can easily fall off.

 

 

However, for planned work, lift trucks can be used with integrated working platforms to allow people to work at height. There are two types of platforms available for lift trucks:

 

 

Integrated working platforms which are attachments with controls that are linked to and isolate the truck controls so that only a person in the platform can control the lift height of the platform and truck movements.  

 

 

Non-integrated working platforms are attachments with no controls in the platform, so a person in the platform cannot control the lift height of the platform or move the lift truck. All lift truck and platform movements are controlled by the truck operator. 

 

 

It is generally accepted that, in conjunction with a forklift truck, an integrated working platform provides a higher level of safety than a non-integrated type. With that said, a non-integrated working platform has been used in exceptional circumstances for ‘occasional unplanned use’, such as non-routine maintenance tasks. These are tasks that would otherwise be carried out using a less safe means of access such as ladders, because it is impractical to hire in purpose-designed people-lifting equipment due to the short duration and occasional nature of the task. A good example would be checking on high-level damage to racking suspected of causing an immediate risk or checking on the condition of damaged roof lights. However, routine or planned tasks such as periodic maintenance or stocktaking, are not exceptional circumstances and are not examples of occasional unplanned use.

 

 

The above views are based on anecdotal experience from the market place. We always suggest you check regulation and manufactures requirement.

For more insight and information on pre-shift inspections for on equipment such as forklift trucks and man lifts, check out these blogs:

Making Sure Vehicles, Machinery and Equipment is Safe is Harder Than it Looks!

Bucket Truck Inspection Checklists. What should you do...

How the Empire Company Built Safety Culture by Making Sure Forklift Inspections Happen Every Shift

Do your safety checklists happen every time? No? Check this out!

Scissor Lift Safety Inspection Checklists - The Why

Forklift Truck Pre-Shift Inspections: Meeting the OSHA Standard

Why Construction Loves SG World USA's Safety Checklist Solution

Getting the Best Out of your Pre-Use Inspection Checklist - Beyond the Checklist

Monthly AED Inspections – Make Sure You Fail Fast

Why You Need to Inspect Overhead and Gantry Cranes

Forklift Truck driver accidents, what's the management responsibility?